Orbinox Hydraulic Works Valves
Orbinox Hydraulic Works Valves – Reliable Water Flow Control
Orbinox hydraulic works valves — gates and sluices for controlling water flows in channels, reservoirs, dams, and drainage systems. Made from stainless steel AISI 304/316L, EPDM/NBR seals. Pressure up to PN10, temperature -20°C…+80°C. Connection EN 1092 PN10, embedded in concrete or wall-mounted. Tightness below DIN 19569-4 class 5 / AWWA C561. Compliance with DIN 19569-4, AWWA C561, BS 7775.
Type CH (Channel Gate)
Three-side sealing for open channels. Sizes 150x150–4500x4500 mm. Benefits: self-adjusting seal, precise level regulation.
Type BU (Bulkhead Gate)
Four-side sealing for tank walls. Sizes on request. Benefits: flush bottom, full isolation, easy wall mounting.
Type MB (Manual Bulkhead Gate)
Manual wall gate. Sizes 150x150–1200x1200 mm. Benefits: simple manual operation, minimal leakage.
Type CT (Channel Type Gate)
Channel gate with bottom sealing. Sizes DN100–DN600. Benefits: non-clogging, flow control in channels.
Type MU (Wall-Mounted Penstock)
Wall-mounted penstock with 4-side sealing. Sizes 150x150–4000x4000 mm. Benefits: bidirectional/unidirectional, self-adjusting seal.
Type AG (Stop Gate Penstock)
Stop gate for channels. Sizes 150x150–3500x3500 mm. Benefits: equipment isolation, manual/hoist control.
Type RA (Radial Gate)
Radial gate for channels. Sizes on request. Benefits: rotary design, precise level control, high strength.
Options & Accessories
-
Materials: stainless steel AISI 304/316L, duplex
-
Seals: EPDM, NBR, Viton
-
Mounting: embedded in concrete, wall mount, existing channel
-
Automation: manual, pneumatic, electric, hydraulic actuators
-
Certification: DIN 19569-4, AWWA C561, BS 7775
Order & Delivery
Order Orbinox hydraulic works valves at KCK.ua! Phone: (044) 494-33-55 Email: kck@kck.ua Delivery across Ukraine: Kyiv, Lviv, Odesa, Dnipro, Kharkiv. Consultation, selection, installation.
Keywords: Orbinox hydraulic valve CH, BU, MB, CT, MU, AG, RA, PN10, stainless steel, buy valve Ukraine.