Discover JUMO digiLine O-DO S10 (Type 202614) at KCK.ua – reliable intelligent sensor from the German brand JUMO, designed for continuous monitoring of dissolved oxygen in aqueous solutions using the optical luminescence quenching principle per ASTM D888-05. This device features two interfaces: digital RS485 Modbus RTU and analog two-wire current (4–20 mA), with automatic temperature compensation and optional air pressure and salinity compensation. Configuration, parametrization, and calibration data are stored in the sensor electronics. Browse the KCK.ua catalog to buy JUMO digiLine O-DO S10 (Type 202614) at a competitive price with delivery to Kyiv, Kharkiv, Odesa, Lviv, and across Ukraine. Certified product with a 1-year warranty, with Plug and Play functionality for JUMO digiLine master (e.g., AQUIS touch S/P).

Advantages of JUMO digiLine O-DO S10 (Type 202614)

JUMO digiLine O-DO S10 (Type 202614) provide low maintenance costs and high stability for oxygen monitoring. Key Advantages: • Low Costs: No electrolyte replacement, polarization voltage, or minimum flow required; long calibration intervals due to low drift. • Accuracy: Reliable measurements with long-term stability, resolution 0.01. • Speed: Response time t₉₀ < 60 s. • Compensation: Automatic temperature (-10...+60 °C via integrated sensor), air pressure (10...2000 hPa), and salinity (0.00...60.00 mS/cm) compensation. • Convenience: Plug and Play installation with JUMO digiLine master, easy sensor cap replacement with preserved calibration data, self-diagnostics with logbook (last 10 calibrations).

Applications of JUMO digiLine O-DO S10 (Type 202614)

JUMO digiLine O-DO S10 (Type 202614) are designed for oxygen monitoring in aqueous environments. Key Applications: • Drinking Water Monitoring: Control of drinking water. • Water Body Protection: Protection of water bodies. • Fish Breeding: Fish farming (fresh and salt water). • Sewage Treatment Plants: Municipal and industrial wastewater treatment plants. • Others: General water and wastewater engineering, universities and educational institutions.

Technical Specifications

• Measurement Principle: Optical measurement based on luminescence quenching. • Measurement Parameters: Dissolved oxygen (0.00...20.00 ppm (mg/l), 0.00...250.00 % sat., 0.00...52.00 % vol., 0.00...514.00 hPa pO₂), temperature (-5...+50 °C). • Accuracy (at 25 °C): Basic tolerance 1 % SAT (≈ 0.1 mg/l or 0.2 % vol or 2 hPa pO₂) plus ≤ 1 % of measured value from 0 % SAT, ≤ 2 % at 100 % SAT, ≤ 3 % at 200 % SAT. • Response Time (at 25 °C): t₉₀ < 60 s. • Pressure Range: 0...5 bar. • Ambient Temperature: 0...+50 °C; storage -10...+60 °C. • Compensation: Temperature (via integrated sensor -10...+60 °C), air pressure (10...2000 hPa), salinity (0.00...60.00 mS/cm based on temperature-compensated electrolytic conductivity, reference 25 °C). • Sampling Interval: 3 s. • Luminophore Operating Life: Up to 3 years (depending on process conditions). • Interfaces: RS485 (JUMO digiLine or Modbus RTU protocol, address 1...247, data formats 8-1-no parity/8-2-no parity/8-1-odd parity/8-1-even parity, baud 9600/19200/38400, min. response time 0...500 ms); two-wire current (4–20 mA, scalable, NAMUR-compliant for anomalies). • Power Supply: For 4–20 mA: DC 18...30 V, max. load 500 Ω, accuracy 1 %, temperature influence 100 ppm/K; for RS485: SELV/PELV DC 10...30 V, consumption ≈70 mW (no termination), max. 660 mW (with termination); two-wire: max. 660 mW. • Electromagnetic Compatibility: Per DIN EN 61326-1 (Class A emission, industrial immunity); not protected against surge voltages. • Connection: Fixed cable with 5-pole M12 connector (A-coded), max. length 50 m; pinout: Pin 1 NC, Pin 2 +24 V, Pin 3 GND, Pin 4 RS485 (RxD/TxD-), Pin 5 RS485 (RxD/TxD+). • Dimensions: Ø 20 mm (shaft) × 310 mm (without cable). • Weight: With 10 m cable: 770 g; with 30 m cable: 1850 g. • Materials: Sensor shaft: PVC; sensor cap: PC; cable sheath: PUR; cable passage: PA. • Protection: IP68. • Operating Modes: JUMO digiLine (on AQUIS touch S/P), Modbus (on JUMO mTRON T or AQUIS 500 RS), analog (4–20 mA). • Calibration: Factory pre-calibrated; field or lab possible (via AQUIS touch S/P, mTRON T, AQUIS 500 RS) or lab (via JUMO DSM on PC with USB converter, part no. 00746250); calibration data and logbook (last 10 with date, time, values) stored in sensor. • Self-Diagnostics: Detects values out of tolerances, oxygen/temperature measurement failures, missing/worn sensor cap; outputs warnings/errors via RS485 or analog (NAMUR-compliant for 4-20 mA). • Accessories (Examples): Suspended fitting (PVC, 0...60 °C, part no. 00740927, with cleaning kit 00740929, max. cleaning pressure 3 bar); immersion fitting (PVC, 0...60 °C, part no. 00740928, with cleaning kit 00740931/00746564); flow fitting (PVC, 0...60 °C, up to 5 bar, part no. 00740925); M12 cables (1.5...15 m); USB converter (part no. 00746250); JUMO DSM software (part no. 00655787/00663703). • Compatible Devices: JUMO AQUIS touch S/P (no. 202580/202581), JUMO mTRON T (no. 705000/705001), JUMO AQUIS 500 RS (no. 202569).

Why Choose KCK for Purchasing JUMO digiLine O-DO S10 (Type 202614)?

KCK is an official JUMO distributor in Ukraine with over 10 years of experience. Our Advantages: • Fast delivery across Ukraine. • Free expert consultations. • Official 1-year warranty. • Wholesale discounts. • Tailored solutions for your business.

How to Buy JUMO digiLine O-DO S10 (Type 202614) in Ukraine?

Ordering JUMO digiLine O-DO S10 (Type 202614) takes just a few minutes:

1. Browse the catalog at kck.ua.

2. Call +38 (044) 494-33-55 or email info@kck.ua.

3. Receive your order via delivery or pick up in Kyiv.