New G20 ZPA Roller Module—Intelligent Buffer System for Conveyor Technology

New G20 ZPA Roller Module—Intelligent Buffer System for Conveyor Technology

With the new G20 ZPA roller module from Pepperl+Fuchs, the infeed of packages on conveyor belts can be adjusted to match the rate of packages leaving the conveyor belt—individually and without time-consuming programming.

Flexible, Cost-effective Solution for Conveyor Systems

The new G20 ZPA module only addresses rollers if necessary. Otherwise, the module puts rollers into "sleep mode", which significantly reduces energy costs. At the same time, five start and stop ramps ensure gradual acceleration and deceleration of the conveyor belts, protecting roller gears in the long run. The module also offers flexible installation, because the device operates independent of the fieldbus and allows integration of up to 256 modules in series.

An additional voltage limiter in the G10 housing intercepts excess feedback current that can occur when the roller conveyors are stopped. This prevents any overvoltage shutdown of the power supply. The compact G10 limiter can be easily attached to the flat cable to compensate for the current return of up to four roller motors.

Learn more about our conveyor solutions: https://www.pepperl-fuchs.com/global/en/material_handling.htm

For more detailed information on Pepperl+Fuchs range of products, please contact our Product-Manager Oleksandr Kutsenko:

E-mail: oleksandr_kutsenko@kck.ua

Phone: +38 (067) 658-07-78